If you are considering building your own Bearhawk, we’re here to encourage you with a variety of options. You could simply purchase the plans and begin scrounging for raw materials, or you can purchase some sub-kits or components from us. We welcome any and all Bearhawk builders into the fold. However, if you think you want to scratch build we recommend that you talk to builders that have gone before you. Nearly all will tell you to purchase our Quick Build kit. Save yourself 1000s of hours of work and fly years sooner. We believe that even craftsmen and machinists benefit from building from our Quick Build kit. (There’s still a lot of enjoyable work to accomplish.)

Bearhawk Quick Build components

Contents of the complete Bearhawk Quick Build Kit (with optional axillary tanks)

Here are the prices and contents of our Canadian aircraft kits and components:


The Quick-Build Kit is on the FAA 51% approved kit list.
Because the airframe is largely fabric covered and because of the way the FAA constructs its definition of the 51% rule, we are able to complete the entire structure so there is no actual structural fabrication to be done other than completing the riveting of the top skin. This is left partially open so the builder can access and install certain components.

Although all of the wing control surfaces are almost ready to be installed, the builder must install the hinges first and then install them, which is part of the 51% program. The same thing is true of the tail, landing gear, control system, etc: the components are finished but must be installed. Assembly and installation not fabrication.

The Quick-Build does not include windshield, tires and brakes, covering/painting materials, seats, upholstery kits, cables, pulleys and hardware.

Included with your Quick Build Kit:

  • Complete set of plans, with serial number   (Note: If you have purchased plans separately, the kit price will be reduced by $295.)
  • Fuselage completely finish welded, no welding required. Ready for stringers, cover and systems installation.
  • Landing gear and tail, completely finished, ready for cover and installation.
  • Control system completely fabricated, ready to install.
  • Wings finished, interior primed, with only the top skin which is already drilled and dimpled and ready to be riveted.
  • Control surfaces assembled, ready to be installed/covered.
  • Wing Struts with end fittings ready for drilling/installation.
  • Fuel tanks installed (aux tanks optional).
  • Motor mount ready to be installed. Choices are Lycoming 0-320/360, 0-540 and Continental 0-470.
  • Firewall and boot cowl, ready for trimmimg and assembly (not drilled).
  • Utility door and float attachment points standard.
  • The frames for all seats are included. Builder will fabricate seat pans and upholstery.
  • Wing tips
  • Fuel caps
  • Trim wheel w/chain
  • Aileron cable guards
  • Flap/Aileron rod end bearings (10)
  • Gascolator
  • Clear windshield (tinted or UV block extra)
  • Gerdes brake master cylinders (one set)
  • Wing tie down rings
  • Aileron bellcrank bearings (4)

Other Components

Full Bearhawk Quick Build fuselage: $27,178 USD
– Includes everything that comes with the Bearhawk Quick Build Kit

– The basic fuselage structure complete, but with only the most important attach fittings finish welded on. These are:

  • Wing attach fittings
  • Wing Strut Fittings
  • landing gear attach fittings
  • wing strut attach fittings
  • and the tail surfaces attach fittings

Start your project with a straight, true fuselage finish welded in our big fuselage jig. UNPAINTED because there are many parts that still need to be welded on.

Bearhawk wingsBearhawk Quick Build Wings: $20,325 USD
– Includes everything that comes with the Bearhawk Quick Build Kit


  • Ribs formed (includes all wing, flap, aileron ribs)
  • Wing spars primed, assembled and finished
  • Also flap and aileron spars included